Brakes/Levers/Pads

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

CenterLine X rotors are the lighter weight version of SRAM's quiet, smooth, and robust CenterLine rotors. The CenterLine X rotor features a two-piece design with an alloy center and steel brake track. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Lightweight, two-piece design - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: 6-bolt - Includes Steel rotor bolts

CenterLine X rotors are the lighter weight version of SRAM's quiet, smooth, and robust CenterLine rotors. The CenterLine X rotor features a two-piece design with an alloy center and steel brake track. Rounded edges make for easier wheel installs and are UCI-compliant. Features - Lightweight, two-piece design - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed, and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment - Qwik-Adjust Barrel Adjuster - Bend Zone - All weights per pair - All levers are compatible with mechanical disc brakes and linear-pull brakes

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

SRAM took their smoothest and quietest brake track and gave it the lightest aluminum carrier they've made yet. The Paceline X rotor is highly refined and specifically designed to for road use. - Optimized specifically for use with road bikes - Paceline X brake track offers smooth and quiet brake operation - SRAM's lightest aluminum carrier keeps weight low - Centerlock lockring included

SRAM's Pad Inserts are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.

True one-finger braking is at hand. SRAM has overhauled their hood and lever architecture and achieved breakthroughs for fit across all hand sizes and easy access to powerful and smooth, easy braking from anywhere on the bar. Independent reach and contact point adjustment allow for a highly personalized setup, with no risk of pinching your fingers or bottoming out on the bar no matter your settings. Better finger wrap on the hood means less fatigue on long days, and Bonus Buttons let you shift or control ANT+ devices with your thumbs. The caliper is not only stiffer, but lighter too, with phenomenal pad clearance for rub-free operation. All that and they still managed to remove 83g from the pair. - One finger braking from the hoods or the drops for less fatigue - SRAM AXS enabled for easy setup, personalization, and reliability - eTap shift logic for intuitive shifting - Bonus Button provides ANT+ device control or auxiliary shift option - Optimized hood shape and Reach Adjust feature allow the lever to fit a wide range of hand sizes - Carbon brake lever for lightweight - Textured shift paddles and hoods for control and comfort - Bleeding Edge technology for easy and clean bleeds - Contact Point Adjust to personalize brake engagement

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad offers powerful braking - Compatible with: DB-DB1-A1, DB-DB3-A1, DB-DB5-A1, DB-LVL-TLM-B1, DB-LVL-ULT-B1, ED-FRC-D1, ED-RED-D1, ED-RIV-D1 - 20 pair

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

SRAM 20mm Post-Mount Adapter Hardware included

With comfortable hoods and lightweight aluminum levers, SRAM's 500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.

With comfortable hoods and lightweight aluminum levers, SRAM's S500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.

SRAM's 500 TT ergonomic brake levers slice the wind and make a great addition to any aerodynamic speed machine. The return springs provide a solid feel and help prevent brake drag, while the aluminum levers offer pinpoint control for maximum stopping power. Plus, the internal cable routing gives a clean look and top aerodynamics.

Just because you eschew gears doesn't mean you're willing to settle for heavy, retro brake levers. Welcome to single speed paradise with SRAM's 900 Single Speed Brake Levers. The unidirectional carbon levers are impressively light and SRAM's renowned ergonomic hoods are always comfy. Set up your single speed rig right with SRAM's 900 brake levers.

The built-in adjustability of SRAM's 990 Aero Brake Levers makes it easy to achieve your preferred braking feel on almost any aerobar setup. A turn of a 2mm Allen key frees the lever to spin, allowing the user to make up to 8mm’s of inward or outward adjustment to their brake calipers. Such wide adjustability makes it easy to fine-tune hard to reach brakes on the most innovative triathlon and time trial machines.

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. - Uses DOT 5.1 brake fluid - Lever body design offers excellent finger wrap, comfort, and control - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a left-side lever with a rear brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

When you choose to ride, advancement means having a group that’s always ready. Apex 1 is that group. As a left lever for your Apex 1 setup, or paired for single speed adventures, the Apex mechanical brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. - ErgoFit design from SRAM RED improves grip and finger wrap - Reach Adjust for a perfect fit - Durable, forged aluminum lever blade with laser texture for a positive touch

Smooth and powerful hydraulic braking mated to 12-speed AXS wireless, intuitive shifting is an unbeatable combo at any level. An optimized hood shape fits all hand sizes for comfortable and controlled braking from the hoods and the drops. Shifting is as easy as ever: one paddle to go to an easier gear, and one to go harder. Nothing extra, nothing distracting. - AXS enabled for easy setup, personalization, and reliability - eTap shift logic for intuitive shifting - Optimized hood shape fits a wide range of hand sizes - Textured shift paddles and hoods for control and comfort - Reach Adjust to personalize fit for more hand sizes - Stealth-a-majig connector for easy setup - Stainless steel hardware is highly resistant to the elements - Includes hydraulic hose and steel-backed organic brake pads - Disc brake rotor and bracket is sold separately

Smooth and powerful hydraulic braking mated to 12-speed AXS wireless, intuitive shifting is an unbeatable combo at any level. An optimized hood shape fits all hand sizes for comfortable and controlled braking from the hoods and the drops. Shifting is as easy as ever: one paddle to go to an easier gear, and one to go harder. Nothing extra, nothing distracting. - AXS enabled for easy setup, personalization, and reliability - eTap shift logic for intuitive shifting - Optimized hood shape fits a wide range of hand sizes - Textured shift paddles and hoods for control and comfort - Reach Adjust to personalize fit for more hand sizes - Stealth-a-majig connector for easy setup - Stainless steel hardware is highly resistant to the elements - Includes hydraulic hose and steel-backed organic brake pads - Disc brake rotor and bracket are sold separately

SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

There's no need for a shift mechanism, but the Apex disc brake is still packed with features. We optimized the hood shape to fit a wide range of hand sizes, and included Reach Adjust for further personalization. - Hydraulic disc brakes for power and modulation - Optimized hood shape fits a wider range of hand sizes - Textured shift hoods for control and comfort - Reach Adjust to personalize fit for more hand sizes

Apex HRD Disc Brake Caliper - Forged aluminum disc caliper features a 2-piston design - Built on SRAM's HydroHC brake platform - Compatible with 160mm and 140mm brake rotors

Bolt on SRAM's Apex Pad & Holder for excellent braking. The holder design makes it easy to switch pads—meaning this system is great for road and cyclocross bikes alike!

As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

The CenterLine Rotor was designed to keep the center of friction consistent throughout rotation thereby minimizing vibration offering consistent performance and a quiet ride. - Compatible with both road and mountain bike brakes - Lightweight, two-piece design - Rounded edges are UCI-compliant and allow for easier wheel installs - Includes internal tooled lockring - 1.85mm rotor thickness